Plots are overlapping - PlotsChecker says everything is ok



  • Hello guys,

    I have a problem again...
    After starting Blago's miner it gives me a red warning that E:\Burst\plots\xxxx and D:\Burst\plots are overlapping.

    After I saw that, I checked with Blago's PlotsChecker if everything is ok and the Checker gives me a green "checked - ok".
    So whatt could the problem be?



  • @typh0n said:

    After starting Blago's miner it gives me a red warning that E:\Burst\plots\xxxx and D:\Burst\plots are overlapping.

    Can you list from nonces to what nonces is on both harddrives, so you can check manually



  • PlotsChecker did not checks plots for overlapping.



  • Thanks @theapple0 and @Blago

    So they only way is to recreate the plots?



  • @typh0n you need to make choice, which plot you will delete



  • I recreated the plots and now the same error appears. The plots look like this:

    1. numericAccountID_0_1187840_2048
    2. numericAccountID_0_3727360_4096


  • @typh0n it's must be like this (second plot continue count of start_nonce+nonces):

    1. numericAccountID_0_1187840_2048
    2. numericAccountID_1187840_3727360_4096


  • @typh0n that two plots are on the same drive? If so the second should be:

    numericAccountID_1187840_3727360_4096
    _____________________start____total_____RAM
    ____________________nonce__nonces___allocated
    ___________________on HDD__of plot

    How you did it they are overlapping... So in this line i'm creating a plot with a total 3727360 nonces starting in nonce nº 1187840 so my final nonce (and start nonce for the next plot) gonna be:

    3727360+1187840=4195200 nonces...

    Understand?
    Sorry by the graphycs the ' ' doesn't work



  • Thank you all! 🙂
    It's plotting now but I have a good feeling that it is going to work.