Good work everyone ! Keep it up !

@hlbcal I have nothing to do with Hpool.
My Burst pool http://moverspool.ml has a one year DL limit.
I merely made the post above to let people know they can make more profit with the same plots.
Granted you will need an ok large plot to have reasonable amount of deadlines bellow one day to mine btchd.

Agreed
So far its been rock solid.

Dont bother with Qbundle atm.
Use the core or an online wallet.

Haitch said it, (completely overlapped) so you will have to re-plot one of the machine in a continuation of the last plot on the first machine.
With regards to the Plot size shown on pools, Creep has a feature to handle this.

https://github.com/Creepsky/creepMiner/wiki/Multi-miner-setup

Good luck

@jameswis use the core its stable.

https://github.com/PoC-Consortium/burstcoin/releases

Hi @jameswis

In order to solo mine you should setup the wallet and then add your local ip 127.0.0.1:8125 and set your submissions deadlines on the miner to like 2 hours max, otherwise you will spam your wallet with unnecessary deadlines.
With a total of 15 tbs I do not recommend you go solo, for that you will need about 200tb
Until then I recommend you join any pool.
Always use the AVX2 miners if your CPU is AVX2 capable.

Also dont use Qbundle its not stable atm, use the core if you go solo and an online wallet if you go pool.
Im on Discord if you like https://discord.gg/yzUmjgw and this is my pool http://moverspool.ml:8080/

Good luck

Quote

rico᠖᠖᠖Today at 1:29 PM
If you have a 2.2.2 and it works: Never change a running system.
Should it get stuck on you, then I'd upgrade.
If you have 2.2.1, I'd upgrade to 2.2.3

So, I have had a few people ask me so here goes nothing.
This is a quick rundown of how to simultaneously mine Burst coin and BTCHD at the same time, without having to reward assigning yourself to Hpool!

1. Install the wallet http://www.btchd.org/en#wallet
   Fire up your wallet and generate a receiving address under receiving addresses
   
2. Create an account at http://btchd.hpool.com/
   Once you have created a user, add your payout address under Assets Management> Payment address, and then copy your apiKey: found on the Basic Settings page.
3. Download the miner here http://btchd.hpool.com/download
   Edit the following in Miner.conf
   MinerName add your username for Hpool
   Paths add your plot paths.
   AccountKey this is the API I told you to copy earlier.
4. Fire up the miner and you should now be mining BTCHD on the same plots you mine your Burst.

Payouts are at 04:00 Copenhagen time.
Btchd.hpool.com is the only BTCHD pool available at this time.
The coin is listed here https://www.bitmart.com/trade?symbol=BHD_ETH

Things to take into consideration.
They have a mortgage plane in place whereby you will only be paid 10% of what you mine, unless
you mortgage 3 times the amount of BTCHD to the amount of TB you would like to mine with.
Invest at your own risk! read more about this on the Assets Management page under Mortgage.
Your miner needs to have the adequate hardware to handle the extra ram and cpu load.
Lastly I would like to note that this coin is very new to me so I don’t know all the pros and cons yet.
However if this was helpful to you at all BTCHD 3GpF5mMGW9PinQf8XhNY9RejoCr9sPBhKd or BURST-7EXC-WXU7-AZ4M-5DE3T
Regards Moverspool.ml:8080 operator.

Hi @Pablo
Like Haitch says what OS and Core or Qbundle ?
Are you getting any errors?